Technical data

44 / 60 HBC-series V7 LV small types profi low power

Evaluation (interpretation) parts of the record:

For greater clarity, the color and scale are changed to images on the previous page.

Here is shows a throttle (input command), the output power in % and current from about 11 to 40 second.

1 partial acceleration (from +42% to +54%) - output power practically follows the input command is a small current peak

2 throttle defend – current decreases during the reduction of power (rpm) to zero (freewheel on)

3 aggressive acceleration (from +10% to +100% (4)) - output power (motor PWM ) goes to 100%, current peak is strong

5 full brake (input command is -100%) – output power goes into negative numbers, the brake is 30% (depending on settings)

– battery current is zero

6 partial brake (input command is -55%) - output power goes into negative numbers, the brake is about 18%

7 neutral – output power is zero

8 ride backward, partial throttle (input command is -75%) - power goes to positive numbers, current flows

9 ride backward, partial throttle (input command is -50%) - power goes to positive numbers, current flows

10 full brake when driving backward (input command is +100%) - output power goes into negative numbers, the brake is 30% (according

to parameters settings) – output power is zero

Note: negative currents flowing to the battery under braking are not displayed (shows zero current). It is displayed as "negative" output

power in % only.

Here it overlaps with violet green

Input request (throttle) – left scale

Output power in % – left scale

Current

– right scale

Neutral

Zero power

Zero current