Technical data

36 / 60 HBC-series V7 LV small types profi low power
P38: Control signal lost masking time (values in milliseconds)
Masking of short driving signal lost. Parameter defines time for which is mask signal lost and keep last correct value of throttle position (i.e. also
power value). After the lapse of this time controller start reduce power (motor rpm), with or without brake. Intensity of braking in this situation is set
in next parameter P39.
P39: Brake intensity when signal is lost (value in %)
Set brake intensity when lost driving signal, after adjusted masking time (P38) from 0% (not brake) to 100% of max. brake.
+100%
0%
(STOP)
0,5 sec.
motor PWM
Freewheel, Brake and Brake in Nedutral, control type Car bidirectional, freewheel active:
–100%
Engine speed matches the new
settings of the control signal (throttle)
– 70%
Braking with 70% intensity
Braking in Neutral position
with 40% intensity (P23)
Motor is stopped
The motor is actively braked
Motor start to rotate
to other side
Control signal
Joystick (throttle)
moving
Unloaded motor rpm go slowly down by inertia (freewheel)
+100%
0%
(STOP)
0,5 sec.
motor PWM
Control signal
Joystick (throttle)
moving
Braking with 40% intensity
Freewheel and Brake, control type Car bidirectional, freewheel active:
–100%
Engine speed matches the new settings
of the control signal (throttle)
– 40%
– 70%
Unloaded motor rpm go slowly down bay inertia (freewheel)
Braking with 70% intensity
Braking with 40% intensity
Motor is stopped
The motor is actively braked
Motor start to rotate
to other side