Technical data

3 / 60 HBC-series V7 LV small types profi low power
Table of content:
Table of content: ........................................................................................................................................... 3
First steps ..................................................................................................................................................... 4
Basic Recommendations .............................................................................................................................. 4
Technical data (valid for 25°C environment temperature) ............................................................................ 5
Accessories and options, available combination of HBC controllers ............................................................ 6
Available versions of HBC-series TMM xxxxx-3 V7 and basic dimension .................................................. 7
Basic description of the controllers ............................................................................................................... 9
Summary of possible inputs / outputs ........................................................................................................... 9
Marking and Specification of the HBC controllers / allowed combination .................................................. 10
Switching DC/DC converter ........................................................................................................................ 10
Basic controller connection ......................................................................................................................... 11
Connecting controller to the traction supply and turning on ....................................................................... 12
Control signals specification ....................................................................................................................... 13
Control and additional control by logic signals ........................................................................................... 16
Cooperation with RC Remote Control ........................................................................................................ 17
Control signal – correct limits and emergency conditions .......................................................................... 18
Back data transfer, telemetry (only for controllers marking „BC“). ............................................................. 20
Sensor motors and controllers .................................................................................................................... 20
Automatic sensor setting procedure ........................................................................................................... 21
Optimal and allowed motor sensor position ................................................................................................ 23
Basic operating modes - mode choice and basic type of behavior ............................................................ 24
Memory select ............................................................................................................................................. 25
Programmable parameters ......................................................................................................................... 26
Description of all parameters ...................................................................................................................... 28
Parameters setting / Data reading from controller ...................................................................................... 39
Locks of parameters ................................................................................................................................... 40
Internal Black Box (flying recorder) – data logger ...................................................................................... 42
Monitoring (display data in real time) .......................................................................................................... 46
Throttle limits settings (range of joystick, range of control signals) ............................................................ 47
Start with Automatic throttle limits ............................................................................................................... 49
Start with programmed throttle limits .......................................................................................................... 50
Maximal revolution of the output shaft Settings .......................................................................................... 51
Maximal revolution of the motor Settings ................................................................................................... 51
Update SW inside the controller (firmware) ................................................................................................ 52
Installation and run program Controller 2 ................................................................................................... 54
Update of program Controller 2 .................................................................................................................. 54
Controller states indication, Error messages (firmware 3.8x and higher) ................................................ 55
Sparking prevent when connect higher voltage .......................................................................................... 56
Additional information ................................................................................................................................. 57
Some of Protective and Safety mechanisms of TMM
®
controllers ............................................................. 58
Accessories ................................................................................................................................................. 59
Content of delivery ...................................................................................................................................... 60
Product Warranty ........................................................................................................................................ 60
Service and Technical Support ................................................................................................................... 60
Note:
Content…………….. all items are available quickly by CTRL+ left mouse button.
blue underlined ….. all like this marking texts in manual quickly jump, by CTRL+ left mouse button, to corresponding content (cross
reference).
In the Manual in „pdf“ format on these marking texts standard cursor changed to hand symbol ( ) . In this case only click to left
mouse button, (without CTRL), caused jump to corresponding content (cross reference).
(§NA) ……………….. parameters or features parking by this symbol are not available in this moment. As soon as will be available,
you can download and update new firmware for your controller – please watch information on our web.
In this manual are described general things about this line controllers. Exceptions for each type of model are described in separate
chapters or differences are highlights.
Separate chapters are devote to technical specifications and related things.
Development, manufacture, service: Tel.: [phone]
MGM compro, Ing. G. Dvorský E-mail: [e-mail]
Sv. Čecha 593, 760 01 Zlín, Czech Republic Info: www.mgm-compro.com