User`s manual

Move the receiver to the second measurement point.

Enter the distance between the first and the second

measurement point by touching the distance icon.

The screen now displays a keypad for entering of the

distance between the measurement points. If you have

selected equal distance in the Application Set-up, you can

now enter the distance or leave the box blank. (In this

case the distance icon and the keypad only shows up at

this point). If you have selected individual distances the

entering of distance is mandatory at every measurement

point.

Touch the register icon to register the measurement point.

Move the receiver to the next measurement point.

Repeat the procedure in step 5 for the rest of the measurement points.

(Up to 99 measurement points can be registered in one measurement.)