User`s manual

APPLICATION SET-UP
Settings unique for this application
can be made in the Application Set-
up. Which functions that are
available depend on which system
you have selected.
Displayed measurement value resolution
0.1, 0.01 and 0.001 mm / 1, 0.1, 0.01 mils (0.01
mils angle only).
Sampling time
Sets the time (in seconds) used to collect
calculation base for measurement values. Select
between 1 and 99 seconds.
Screen filter
Sets the screen filter on a scale from 0 to 10
where 0 is disabled and 10 is maximum
filtration. This slows down the update frequency
of the screen values without reducing the
accuracy of the registered values.
Standard straightness, straightness with
rotational center as reference (rotate laser
transmitter), straightness with center of bore as
reference (rotate receiver), straightness with
Multipoint, straightness with center of tube as
reference or straightness with Arc Angle can be
selected.
92