User`s manual

Mounting of the laser transmitter T220
The T220 can either be mounted on a magnetic
base together with the angular bracket or be
mount
Mount the angular bracket on a magnetic base
or on a tripod. Then mount the T220 to the
angular bracket, as in picture. Use the supplied
screws ed on a tripod.
Mounting of the receiver R210
The R210 is mounted on the
magnetic base with spirit level
together with the receiver
adapter and the rods.
Mount the R210 to the receiver
adapter with the supplied
screws. Mount the rods to the
magnetic base with spirit level.
Slide the R210 on to the rods,
as in picture. ( -Y shall be
upwards.)
Note: Make sure that the
receiver is properly locked in
its position.
90