User`s manual

2. Move the Detector to the second measurement point, check

that the angle values is the same as at the previous

measurement point and touch the register icon

The screen now displays a keypad for entering of the distance

between the measurement points. If you have set equal distance

in the Application Set-up you can now enter the distance or

leave the box blank. If you have selected individual distance the

entering of value is mandatory. When the entering of distance is

confirmed the second measurement point is displayed on the

screen.

3. Move the detector to the next measurement point and repeat the

procedure in step 2. Continue until all measurement points are registered.

Up to 16 measurement points can be registered in one measurement.