User`s manual

BASIC STRAIGHTNESS MEASUREMENT

INTRODUCTION

In the Basic Straightness Measurement program the laser beam is used as

reference. The deviation in distance between the laser beam and the

measurement object is measured in two or more positions with the use of the

detector unit.

Start the program by touching the Basic Straightness

measurement icon in the main menu.

Go to the Application Set-up for settings.

APPLICATION SET-UP

Settings unique for this application can be made in the Application Set-up.

Which functions that are available depend on which system you have

selected.

Displayed measurement value resolution

0.1, 0.01 and 0.001 mm / 1, 0.1, 0.01 mils

(0.01 mils angle only).

Sampling time

Sampling time from 1-99 seconds.

Screen filter

From 0 to 10, where 0 is filter off and 10

is max filter. This slows down the update

frequency of the screen values without

reducing the accuracy.