User`s manual

MACHINE TRAIN ALIGNMENT
INTRODUCTION
A machine train is three or more units with rotating shafts connected to each
other with couplings, i.e. driving unit - gearbox - driven unit. With an
ordinary shaft alignment system you will have to make an alignment for each
machine and then calculate which one to adjust. A cumbersome task with a
large risk to make errors. With a Fixturlaser Shaft Alignment System you do all
the measurements and then the system makes the calculations and gives you
the option to choose the machine you want as the stationary machine.
See also Shaft Alignment Horizontal Machines.
START THE PROGRAM
Start the program by touching the Machine Train Alignment
icon in the Main Menu.
MEASUREMENT PROCEDURE
The screen displays three different applications: 3, 4 or 5 units (2, 3 or 4
couplings). Touch the icon corresponding to your specific alignment.
73