User`s manual

DOCUMENTATION

There are three possibilities to document the measurement.

Save the measurement in the system memory. When a

measurement is saved in Shaft Alignment for Horizontal

Machines it is the measurement result that is stored and not

the displayed measurement after performed adjustments. To

store this, redo the measurement and then store it.

Print the result.

Export saved measurements to a computer.

RESUME FUNCTION

The Shaft Alignment program for Horizontal Machines is supported by a

resume function, which stores all the necessary data temporarily. The resume

function enters when the system is shut off automatically (auto off) or when

the low battery warning is shown.

When the system is restarted after resume

a selection box appears. Touch the

Horizontal Shaft Alignment icon to get

back to the saved data or touch the Main

Menu icon to cancel and go to the Main

Menu.