User`s manual

SHAFT ALIGNMENT VERTICAL

MACHINES

INTRODUCTION & MOUNTING

See Shaft Alignment Horizontal Machines.

START THE PROGRAM

Start the program by touching the Vertical Shaft Alignment

icon in the Main Menu.

Go to the Application Set-up for settings.

APPLICATION SET-UP

Settings unique for this application can be made in the Application Set-up.

Which functions that are available depend on which system you have

selected.

Displayed measurement value resolution

0.1, 0.01 and 0.001 mm / 1, 0.1, 0.01 mils

(0.01 mils angle only).

Sampling time

Sampling time from 1-99 seconds.

Screen filter

From 0 to 10, where 0 is filter off and 10

is max filter. This slows down the update

frequency of the screen values without

reducing the accuracy.