User`s manual

APPLICATION SET-UP
Settings unique for this application can be made in the Application Set-up.
Which functions that are available depend on which system you have
selected.
Displayed measurement value resolution
0.1, 0.01 and 0.001 mm / 1, 0.1 and 0.01 mils
(0.01 mils angle only).
Sampling time
Sampling time from 1-99 seconds.
Screen filter
From 0 to 10, where 0 is filter off and 10 is max
filter. This slows down the update frequency of
the screen values without reducing the
accuracy.
Measurement method
The Clock method or the Tripoint™ method.
Softcheck
Starts the sub-function for checking of soft foot
conditions.
Repeatability Test
Starts the sub-function for repeatability test.
Thermal offset
Input mode for compensation values.
Static feet selection
Recalculates the measurement values according
to static feet choice.
42