User`s manual

Alignment (Tripoint™)

Real time adjustment is only available at 12 and 6 o’clock position for verti

adjustment and 3 and 9 o’clock position for horizontal adjustment. The

inclinometer senses which position it is at and automatically updates the

readings as the machine is moved.

cal

The shaft must be within ±3° from

12/6/9/3 o’clock positions before real time values are available. This is

indicated by the led on the TD-M changing from flashing green to alternate

red and green light.

Rotate the shafts to the 12 or 6 o’clock position. Adjust the machine

vertically until the values for both parallel and angular alignment

are within tolerances required.

Rotate the shafts to the 3 or 9 o’clock position, touch the change view

ne horizontally until the required

ved.

icon and adjust the machi

alignment is achie