User`s manual

If the shafts are rotated to a position where the TD-units are NOT positioned
in the 12/6 o’clock or 9/3 o’clock position, the values are displayed with a
black mark in the top right corner of the value box and are not real time
values. You can toggle between horizontal and vertical position values by
using the change view icons.
Re-measuring of all positions.
Show horizontal view.
Show vertical view.
Open Application Set-up.
Save the measurement. See Memory Manager.
Print a screen dump.
Exit from the program.
Evaluating Misalignment
See the Clock Method.
36