User`s manual

Evalua
The angle and offset values are used to determine the alignment quality.
These values are compared to alignment tolerances to determine whether
correction is necessary.
ting Vertical Misalignment
Positive Angle value Positive Offset value
Negative Angle value Negative Offset value
The foot values give the movable machine’s position at the feet where
corrections are made.
Positive values mean that the machine is high and shims must be removed.
Negative values mean that the machine is low and shims must be added.
Evaluating Horizontal Misalignment
The angle and offset values are used to determine the alignment quality.
These values are compared to alignment tolerances to determine whether
correcti on is necessary.
Positive Angle value Positive Offset value
Negative Angle value Negative Offset value
The foot values give the movable machine’s position at the feet where
corrections are made.
Positive values mean that the machine is away from you and must be
moved towards you.
Negative values mean that the machine is towards you and must be pushed
away from you.
31