User`s manual

FIXTURLASER AP200
ANGULAR PRISM
P
ART NO: 1-0243
The angular prism is used for measurement of perpendicularity and
parallelism together with a laser transmitter, detector and a displayunit. The
angular prism is deflecting the laser beam 90° within ±0,02 mm/meter. A
built-in tilt and coordination table makes it easy to adjust the angular prism
to the right position. The angular prism is manufactured in hard anodized
aluminum. The prism, which is a precision made 5 sided glass body, deflects
the laser beam 90° even if the laser beam hits the prism obliquely. With the
two screws on top the underlying mirror is uncovered, which is helpful to use
when adjusting the angular prism and the laser transmitter to the right
positions before measuring. Adjustment screws are for movement sideways in
two directions and for rotation of the turret.
Technical specification
Accuracy in deflection 90° ±0,02 mm/m
Tilt adjustment from level ±50 mm/m
Parallel adjustment in X and Y ±2,5 mm
Dimensions 88x97x129 mm
Weight 980 g
245