User`s manual

Paper feed
When the printer is on, keep the button down to advance the paper.
CONFIGURATION DIP SWITCHES
Your printer has 8 switches located in the bottom of the paper chamber. You
can print the DIP switch settings as indicated using the button. To change the
DIP switches position use a pen or something comparable.
IMPORTANT: Whenever changing the DIP switches turn the printer off, change
the DIP switches and then turn the printer on.
The DIP switches should have the following configuration when the printer is
used together with the Fixturlaser platform.
1 2 3 4 5 6 7 8
1 1 0 0 0 1 0 0
BATTERIES OPTION
When the printer is fully charged, its constant printing time is about 60
minutes. In order to improve the batteries life lenght, it is recommended to
charge the printer after this printing time. The printer can be charged while
it is off. (In this case the indicator does not light.)
CHARACTERISTICS
Printer
Printing system Thermal dot matrix
Method Optimized bidirectional
Paper feed Friction
Line height 12 dots
Format 40, 80, 2 x 40 columns
Character table IBM, set 2 (229 forms)
220