User`s manual

SYSTEM PRINTER
POWER ON
When turning the power on, the printer performs internal tests and
initialisations. When the tests are completed the printing head moves, the
red indicator lights up and the printer is ready for use.
RED INDICATOR
The indicator informs on the state of the printer.
Constant light Printer ready
Flashing slow, short lightning Memory full, wait to launch the next
printing
Flashing slow, short extinction Loading batteries
Flashing high Print head blocked. Turn the printer off,
remove the paper and replace it
correctly.
BUTTON
The round button on the top of the printer has three functions.
Printing of DIP switch settings and description
Turn the power on while pressing the button to get a print out of the use and
current position of the DIP switches.
Hex dump mode
When the printer is starting up, press the button to launch hex dump mode.
To disengage, press the switch again.
219