User`s manual

STATIC FEET SELECTION
In some cases the machine that is displayed as the moveable machine is not
move- able, or just some of the feet of the moveable machine are not
adjustable. In order to perform a proper alignment in these cases the Static
Feet Selection program will be helpful. In this program you can freely select
which feet to be adjustable or locked. The horizontal shaft alignment has to
be accomplished before starting the program.
Start the Static feet selection program by touching its icon in
the Application Set-up.
PROCEDURE
Enter the E and F dimensions.
Locking symbols for each foot
are now displayed. Touch the
two feet you want to lock.
The feet values are displayed
at the unlocked feet as live
values.
211