User`s manual

Feet values
Touch the feet icon at the
Stationary or the Movable
machine.
Touch the foot value boxes.
Enter the foot values in mm
or mils according to the pre-
set unit. Enter also required
distances.
Predicted dial indicator values
Touch the dial indicator
icon.
Touch the dial indicator
value boxes and enter the
values in mm or mils
according to the pre-set
unit. Enter the distance
between shaft ends (DBSE).
Parallel/angular error
Touch the misalignment
icon.
Touch the value boxes and
enter the angular error in
mm/100 mm and the
parallel error in mm, or
mils/inch and mils,
according to the pre-set
unit.
208