User`s manual

SOFTCHECK™
A soft foot condition needs to be corrected before any alignment takes place.
If not, the measurement result will be of no value. It is more or less
impossible to establish if there is a soft foot condition without using some
kind of measurement tool. The Fixturlaser Alignment Systems built-in
Softcheck TM program checks each foot and displays the result in mm or mils.
The Softcheck TM program is entered from the Application Set-up in the
Application program. The measurements A, B and C have to be set before
checking soft foot.
Start the Softcheck TM by touching its icon in the Application
Set-up.
PROCEDURE
Check that all feet bolts are firmly tightened
.
205