User`s manual

REPEATABILITY TEST
Before starting the measurement it is recomendable to perform a
repeatability test to set the correct sampling time. With correct sampling
time it is possible to reduce the influence of external conditions (e.g. air
turbulence or vibrations) that otherwise would compromise the accuracy of
the measuring result.
The Repeatability Test takes 5 readings with the selected sampling time and
shows the difference between highest and lowest value. This difference will
decrease when selecting a longer sampling time.
Do the Repeatability Test at the position far from the transmitter.
Open the Repeatability test function by touching its icon in the
Application Set-up.
201