User`s manual

REAL TIME DATA TRANSFER
This program sends the data from the receiver units to the serial port. The
information displayed on the screen is what is sent to the connected
computer.
Note! It is recommended that external power is used during the transfer.
Screen information:
Example when a TD-S and a TD-M unit are connected.
TDS unit serial no x (axis) transmitted value
TDM unit serial no. x (axis) transmitted value
TDM unit serial no r (inclinometer) transmitted value
Example when an R210 is connected.
R210 unit serial no. y (axis) transmitted value
R210 unit serial no. x (axis) transmitted value
183