User`s manual

RECEIVER DISPLAY
INTRODUCTION
In the Receiver Display program the screen displays the values from the
connected receiver(s). The values can be treated with some functions.
Start the program by touching the Receiver Display icon in the
Main menu.
Go to the Application Set-up to change the settings.
APPLICATION SET-UP
Settings unique for this application can be made in the Application Set-up.
Which functions that are available depend on which system you have
selected.
Resolution
Sets the displayed measurement resolution
to 0.1 – 0.01 – 0.001 mm in metric mode and
1 – 0.1 – 0.01 mils in imperial mode (0.01
mils angle only).
Sampling time
Sets the time (in seconds) used to collect
calculation base for measurement values.
Select between 1 and 99 seconds.
177