User`s manual

.
The reference screen with one point
measured
The reference screen with both
points measured.
The reference is now established and
measurement of the rolls can start.
You can always go back and re-check
the reference at any time during the
measurement process. To do so touch
the Re-check icon at the far right in
the Summary screen. This might be
necessary if there are people working
in the area. It is essential to the
measurement result that the T220
remains untouched during the
process. If moved, only the slightest,
it is devastating to the measurement
result and you will have to start over
again.
The summary screen when the
reference is established.
165