User`s manual

Screen filter
Sets the screen filter on a scale from 0 to
10 where 0 is disabled and 10 is maximum
filtration. This slows down the update
frequency of the screen values without
reducing the accuracy.
Measurement registering
Select between registering with detector
or by manual entry.
Result display
Sets how the measurement result is
displayed. Select between per 1000 mm
(per 1”), per roll length or as an angle.
Tolerance
Sets the tolerance for when the zero-
value of the roll symbol should be
displayed.
Repeatability Test
Starts the sub-function for repeatability
test.
Contrast
Touching respectively on each side of the
symbol to increase and decrease the
screen contrast.
Backlight
Turns on or off the screen backlight.
161