User`s manual

Rectangular configuration
Up to 11 x 11 points can be measured. Number of points is selected by
entering distances.
Equal distances can easily be entered by enter them at the last point (most
far from A1). The same distance will then be filled in all empty boxes towards
A1.
Distances can be changed and removed until the measurement result is
confirmed. To remove a distance, enter 0. When removing a distance,
distances beyond that distance will also be removed. Distances cannot be
removed if a measured point is beyond the distance.
Circular configuration
Up to 3 circles with 16 points at each circle can be measured. Number of
points is selected by entering diameters and number of points at a circle.
Diameters and number of points at a circle can be changed until the
measurement result is confirmed. When changing number of points it has to
be a multiple of the origin number of points. Circles and number of points at
a circle cannot be removed.
140