User`s manual

SAFETY AND CARE
POWER SUPPLY
Fixturlaser Alignment Systems are powered by four alkaline batteries, size
LR 20, in the display unit or by the optional external power unit. The lifetime
of the batteries is approximately 24 hours when the system is used for a
typical alignment job. The power indicator in the main menu displays the
power from the batteries. When the power is low a battery replacement
warning appears on the screen.
The batteries are replaced by opening the caps revealing the battery tubes.
There are two batteries in each compartment. The batteries should be
positioned with the plus pole pointing inwards the display unit and the minus
pole pointing towards the caps. You can use rechargeable NiCd-batteries but
you should expect shorter operating time than with alkaline batteries. If the
system turns off due to low power, the system returns, after battery
replacement or connection of external power, to the application where it was
when it turned off. No information is lost!
If the system is to be stored for a longer period of time the batteries should
be removed to prevent damage.
The external power unit is connected to the terminal next to the serial port
on the display unit and to a wall socket with 110 - 240 Volts.
13