User`s manual

Mounting of the receiver R210
The R210 is mounted on the
magnetic base with spirit level
together with the receiver
adapter and the rods
Mount the R210 to the receiver
adapter with the supplied screws.
Mount the rods to the magnetic
base with spirit level. Slide the
R210 on to the rods, as in picture.
( -Y shall be upwards.)
Note: Make sure that the receiver
is properly locked in its position.
Mounting of the TD-M 100
The TD-M 100 is mounted on the
magnetic base with spirit level
together with the rods.
Mount the rods to the magnetic
base with spirit level. Then mount
the TD-M 100 to the rods, as in
picture.
135