Dome Network Camera Installation Guide Before attempting to set up or operate this camera, please read this quick installation guide and retain it for future reference. Model No. TN3230 QR-code for camera installation in the C4Home app.
Copyright © 2014 Compro Technology, Inc. All rights reserved. Trademark Compro, and the Compro logo are trademarks of Compro Technology, Inc. C4Home and C4Home logo are registered trademarks of AVSecur Technology, Inc. Microsoft, Windows Vista, Windows and the Windows logo are trademarks of the Microsoft group of companies. SD, SDHC and microSDHC Logos are trademarks of SD-3C, LLC. Apple, Apple Logo, Mac, Mac OS, iPad, iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
Contents Compro TN3230 - Installation Guide Important Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Regulatory Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Overview. . . . . . . . . .
Compro TN3230 - Installation Guide Important Notices Regulatory Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
The following is a list of items included in the package. Please check the package contents on your hand. If anything is missing, please don’t hesitate to contact your local distributor.
Compro TN3230 - Installation Guide Hardware Overview Camera Layout No. 4 Name Description 1 IR LEDs Provides additional lighting in low light conditions 2 Ambient light sensor Feeds information on environmental lighting condition to the camera 3 Lens Vari-focal, f 3~9 mm, F1.2~2.
Name Compro TN3230 - Installation Guide No.
Compro TN3230 - Installation Guide Digital I/O Connector Block The digital inputs are normally used with security sensors, e.g. passive infrared sensors (PIR), smoke detectors, etc. They work by detecting a change in the state of open and closed circuit. The output ports are normally used to trigger external audio or visual indicators, e.g. sirens or strobe lights, etc.
Before you mount the camera on a dropped ceiling, you must first ensure that the ceiling is robust enough to hold the weight of the camera. Then refer to the following steps. 1. Use the supplied drill template to drill three mounting holes on the ceiling. Then drill a hole for the camera’s protective cap. 2. Secure the camera to the ceiling using the supplied hex cap screws and hexagon nuts.
Compro TN3230 - Installation Guide Connect the Cables Connect Camera Using PoE This camera supports PoE (Power-over-Ethernet), which allows electrical power and IP data to be both delivered on a single Ethernet cable. The following instructions explain how to connect your network camera using PoE. PoE Switch (802.3af class3 Type B) Wireless Router/Hub Internet 1.
Compro TN3230 - Installation Guide Internet Wireless Router/Hub Midspan (PoE Injector) Using Ethernet Cable and Power Adapter The figure below shows the basic cabling of your IP camera. Internet Wireless Router/Hub 2 1. Connect an Ethernet cable (not supplied in the package) between IP camera with your wireless switch/router. 2. Connect the power adapter/power cable (optional accessary, not supplied in the package) to the IP camera and plug to the power outlet 3.
Compro TN3230 - Installation Guide Install C4Home App and Add Camera Make sure your smartphone is able to go to internet via your wireless router. Then download the C4Home app from Apple store or Google Play and install to your smartphone. Start C4Home app and register your personal C4Home account. (You can scan the QR-code below on your smartphone to add C4home app.
Follow the instructions below to adjust the camera's varifocal lens. Adjust Zoom and Focus 1. To adjust the zoom and focus, first remove the protection sheet from the top cover, and then loosen the fixing screw on the top cover to remove the top cover. in below figure) and move the lever to 2. Loosen the zoom lock lever (labeled adjust the angle of view. Then tighten the zoom lock lever. 3.
Compro TN3230 - Installation Guide 60° 180° 60° 180° 3. Loosen the tilt adjustment screw (labeled in below figure) on both sides and then tilt the lens holder (labeled in below figure) to adjust the camera's tilting position. The tilt adjustment range is between +60 degrees to -60 degrees. 4. Tighten the tilt adjustment screws and then, if desired, go on to adjust the rotation of the camera image. 60° 60° 180° \ 180° 60° 180° in below figure). Then grab 5.
Change SD Memory Card The camera comes with a 4GB microSD card pre-installed inside the housing. The SD memory card is user-upgradeable. And if you like to replace it, refer to the steps below that explain the procedure. 1. Loosen the fixing screws on the top cover and remove the top cover. 2. Locate the microSD card slot below the camera's LED status indicator. Unplug the digital IO cable and audio cables from the camera, and then push the preinstalled SD card gently to release it. 3.
Compro TN3230 - Installation Guide Operation Instant Monitoring From C4Home iPhone/Android App When you enable and register the C4Home service, you can use the C4Home app on your iPhone, Android phone or tablet to manage and watch live video of Compro cloud network cameras. The C4Home app is a safe and easy way to monitor your home, office and your valuable possessions from anywhere in the world.
Icon Name Compro TN3230 - Installation Guide tures. Description Edit Click here to remove the installed network camera from list. Add Camera Click here to add camera to the list. Camera Setup Here you can setup more details for each camera: • Camera Settings: Setup the camera name and password • Stream Settings: Seup the Codec, Resolution, Frame rate for video streaming and Enable/Disable audio and Codec for audio streaming.
Compro TN3230 - Installation Guide Icon Name Description Setup Page Click here for basic settings of C4Home app: • Language: Select the display language for C4Home app. • Stream Buffer Size: Setup the stream buffer size for low, median or high. • Auto Login: Enable/Disable auto login for C4Home app. • Push Notification: Enable/Disable the push notification for your device. If you enable it, it will send you the push notification when event triggered. • Logout: Logout the C4Home app.
CAMERA VIDEO AUDIO NETWORK Sensor 1/3" Progressive scan CMOS 2-megapixel sensor Lens HD Vari-focal, f 3~9 mm, F1.2~2.1, auto iris, IRcorrected Zoom 3X optical (manual adjust), 10x digital (total 30x) Angle of View 31.7° ~ 93° Camera Angle Adjustment 360° Pan (-180°~180°), 120° Tilt (30°~150°), 360° Rotation Min Illumination • IR Mode: 0 lux with built-in IR LEDs on (18 LEDs in total; effective distance up to 20m) • Color Mode: 1.0 lux Shutter Time 1/5 ~ 1/16000 Sec.
Compro TN3230 - Installation Guide C4Home App Free mobile applications for iPhone and Android • Motion/Audio detection and push notification • Private mode and audio alarm • Mobile digital zoom control • Over-the-air firmware update • Dropbox cloud storage for event snapshot • SD card playback for event recording • Share video to others • Watch 4 channels at once (Android/PC only) MJPEG Mode Viewing of camera image via phone browsers 3GPP Mode Viewing of camera image via 3G phones (3GPP Streaming) Vi
If you need any technical support, fill out the online form (http://comprousa.com/en/ form.htm) or directly email to support@comprousa.com. Compro Technology, Inc. www.comprousa.com Tel. +886 2 2918 0169, Fax +886 2 2915 2389 4F, No.
20 Technical Specifications Compro TN3230 - Installation Guide
w w w.comprousa.com Compro Technology Head Office 4F, No.12, Alley 6, Lane 45, Pao Shin Road, Hsintien District, New Taipei City 231, Taiwan Tel. +886 2 29180169 Fax.