Operator`s manual

Channel Status Identification

The levels in the Live screen use colours to indicate channel status, as follows:

• blank: Show channels that are off

• white on red: Shows intensities controlled by the console channel control. To

remove the channels from channel control press [CLR].

• white on magenta: Shows intensity channels controlled by the hanheld remote

channel control. To

remove the channels from channel control press [CLR]. Channel levels turn red to

indicate they have been changed

• red on black: Shows channels changed by a channel control but no longer actively

controlled. To clear this indicator, press [SHIFT] [CLR]

• magenta on black: Shows an intensity channel controlled by an X Playback that is

fading up.

• green on black: Shows an intensity channel controlled by an X Playback that is

fading down.

• blue on black: Shows an attribute channel controlled by an X Playback that is

fading up or down.

• cyan on black: Shows channels controlled by a stopped X Playback.

• yellow on black: Shows channels controlled by a submasters.

• white on grey: shows channels controlled by an effect playback.

• red on grey: Shows unselected channels on Hold. Only the channel control can

change its level.

• black on red: Shows selected channels on Hold.

• yellow on red: Shows channels mastered by inhibitive submasters.

• black on yellow: Shows channels mastered by exclusive submasters

• white on black: Shows DMX CHAN input levels. DMX CHAN inputs require

CommuniquePro Software.

• white on green: Shows an intensity controlled by a remote control.

• Dark grey box: Channel that has been Auto Preheated. When function is enabled

by setting Auto Preheat in Show Setup Screen to ON and a value set in Preheat Group

999.5.

• Cyan on dark grey: Attributes that have been automatically moved while dark. When

function is enabled by setting Auto Move While Dark in Show Setup Screen to On.

• Black on grey: Shows channels held by a stopped X Playback