Operator`s manual

17
-
204
To find the console serial number, press [REPORT] and look at the CONS field in the System
Report Screen Configuration window.
This password is unique to your console with its application software and is not transferable.
Keep a record of your password. If you change the password for additional application software,
entering the old password will revert to the previous configuration.
{ENTER PASSW} lets you enter the password. If you are not already in the Software menu,
press [ARCHIVE] {SOFT}.
Type in the supplied password number with no spaces or other keys then press [*]. If the
password is entered incorrectly a Password 'Please Re-enter' message appears. To cancel the
operation, press {BACK} .
Once entered, the password cannot be displayed again.
Note: A new password is sometimes rejected with incorrect ILLEGAL CONSOLE error. If this
happens, press the [*] key before entering the password digits.
Loading Software
The operating software is pre-loaded at manufacture. You will need to update this software if new
versions are released. For further information on how to load the operating software refer to
Loading Software.
The OS field in the System Report Screen Configuration window shows the operating software
that is currently loaded on the console. To show this field, press [REPORT].
Note: Show files from version 2.4 software cannot be loaded into previous software versions. You
must load this version of software into the console before loading the show.
Loading Application Software
You will need to load application software if you are loading additional application software (e.g.,
Server Software) or if you are adding channels to your console. For information on how to load
application software refer to Adding Additional Channels or Applications
After you enter a password, or if the 21 day period ends, this method of loading application
software will not work. Refer to Password Operations for information on how to enter and save
the password.
The APPL field in the System Report Screen Configuration window shows the application
software currently loaded on the console. To show this field, press [REPORT]