Installation guide

9
Hardware Installation
Warning
Unplug your PC’s main power cord before installing VideoMate Vista
M3F/M5F PCI card. Failure to do so may cause damage to your VideoMate
Vista M3F/M5F PCI card and void your warranty.
1. Shut down your computer and unplug main power cord.
2. Remove the computer case cover.
Power Up Connections
(Step 3~6 only apply with VideoMate Vista
M5F TV card for power up feature)
3. Locate the ATX power switch pins on your computer case and trace the
wires to the power switch connector on your mainboard. The ATX power
switch cable is normally a twisted pair cable with a two-pin connector as
shown above.
39
Timeshift Play/Pause Play/Pause Play/Pause
40
Change scale of screen ----- Skip Forward
41
----- Enter frequency -----
42
Channel surf ----- -----
43
Sleep function Sleep function Clear
44
ComproDTV ComproDTV Zoom
45
Playlist Playlist Enter
46
C.C Language ----- Red
47
ComproDVD ComproDVD Green
48
ComproDTV ComproDTV Yellow
49
ComproFM ComproFM Blue
50
Setup Setup Teletext on/off