Installation guide

40
You may need to consult the manufacturer of your router. Note: Your router
may require a reboot after port forwarding had been set.
The above is a sample illustration of what you need to do in order to enable
remote viewing of the IP camera.
4. Once the above steps are done, you should be able to log-on to the camera
from a remote location. Please type in the DDNS address or the static IP
address depending on your configuration. For example, in this case, you
should enter http://61.220.20.16:80 into the Internet Explorer to gain access
to the camera.
Note: If you have multiple cameras installed on a network, you will need to
change the HTTP and RTSP port on the cameras manually so each one of them
will have a unique port. E.g. you may wish to change the HTTP and RTSP
server ports on the 2
nd
camera to 81 and 554 respectively. You can access the
2
nd
camera by typing in http://61.220.20.16:81.
Compro Technology, Inc.
www.comprousa.com
P/N 3GA0310475
Rev.1.1