Installation guide

22
Start ComproView:
Once the hardware and software installations are done, user can start
configuring the ComproView by adding cameras and setting the
detection range.
After the software is installed, user could start to add the camera and
device to begin the monitoring.
1. Go for start -> All Programs -> ComproView -> IP Camera Utility
2. After IP Camera Utility had been Launched, please select the
desired camera from the list and press the “Wizard” button to
guide you through the configuration process.
After you’ve configured the available cameras, you can start the
ComproView program, start -> All Programs -> ComproView ->
ComproView
3. At the log-in window, please enter the user name and password to
gain access to the system. The default user name and password is
“admin”.