User`s guide

Compro CP180 - User's Guide
Compro CP180 - User's Guide
13
Operating the Camera
Motion Detection
You can congure the motion detection function here. Switch to 'ON' and then press
the setting button to enter its submenu. You can create up to 4 motion detection areas
by enabling 'MONITOR AREA' and adjusting the 'TOP/BOTTOM/LEFT/RIGHT' slider
separately. You can also adjust the detection sensitivity. 'BLOCK DISP', when switched on,
willhighlightmovingobjectsinthescenewithcolorblocks;whenswitchedto'ENABLE
', it allows you to enter a grid screen in which you will use the operation buttons to
move the translucent square and, by pressing the setting button, specify areas in the
scene that will not be detected (which then will become transparent). To exit the grid
screen, press and hold the setting button for 2 seconds before releasing it.
MOTION DET
DETECT SENSE 111
BLOCK DISP OFF
MONITOR AREA ON
AREA SEL 1/4
TOP
000
BOTTOM
000
LEFT
000
RIGHT
000
RETURN
Privacy
Privacy function can create up to 4 masks to protect sensitive areas in the scene. Switch
to 'ON' to enter its submenu as shown below. Select an area and adjust the 'TOP/
BOTTOM/LEFT/RIGHT' slider separately to create a mask on screen. You can also specify
the color, transparency (1 being opaque) and mosaic setting (not eective on opaque
masks).
PRIVACY
AREA SEL 1/4
TOP
000
BOTTOM
000
LEFT
000
RIGHT
000
COLOR 1
TRANSP 1.00
MOSAIC OFF
RETURN