Specifications
VGA/XGA to RGBHV Converter
The VP-100 is a high performance VGA/XGA/
UXGA to Video converter designed to allow a
single VGA/XGA/UXGA source to simultaneously
drive a local monitor and a remote large display
device. Many projectors and large monitors
use BNC connectors rather than multi-pin D
connectors. The VP-100 solves this physical
incompatibility, and provides local monitor loop-through, as well as
necessary buering, amplication, and sync processing. (Note that
the VP-100 does not perform scan rate conversion.) The VP-100 will
accept all typical graphics modes such as VGA, SVGA, XGA, SXGA, and
UXGA and will output RGsB, RGBS, or RGBHV. Video Bandwidth of 350
MHz. It allows looping with a termination switch, cable EQ. control,
Hs and VS shift control and ID bit control. Power supply included. 7
Year Warranty. Weight: 0.67 Lbs. Dim.: 4.7” x 2.95” x 0.98” , W, D, H.
VP-100 $365.00
S-Video to Composite
Converter/1x2 Y/C DA
The 401C combines the functions of
a Distribution Amplier and encoder
in a single compact unit. It accepts
one S-Video (YC) input and distributes
the signal to a total of four Outputs,
two of which are S-Video, and two
that are converted into the composite video format. The 401C is
an ideal compatibility solution for presentation systems consisting
of display, recording, and routing equipment requiring dierent
signal formats. A power supply is included. 7 Year Warranty. Weight:
0.62 Lbs. Dimensions: 4.7” x 2.95” x 0.98”, W, D, H.
401C $175.00
Composite to S-Video Decoder
The 401DN is a high quality decoder
designed to convert composite
video into S-Video (YC). It is an
excellent compatibility solution
for many applications in which
composite sources need to be
interfaced with S-Video displays,
switching systems, etc. The 401DN
has full compensation for YC delay,
and comes with a 12V power supply. 7 Year Warranty. Weight:
0.62 Lbs. Dimensions: 4.7” x 2.95” x 0.98”, W, D, H.
401DN $175.00
401DXL Composite to S-Video Converter/Switcher $210.00
CV & Y/C Scaler with XGA output on HD15
The Kramer VP-413 is a high performance Digital Scaler for composite
video and S-Video (Y/C) signals. It will scale a video signal to a selectable
computer graphics video on a HD-15
connector. Multi-Standard - PAL, SECAM,
& NTSC (3.58/4.43). Computer Graphics
Output Resolutions - VGA (640 x 480),
SVGA (800 x 600), XGA (1024 x 768), or
WXGA (1366 x 768). Control - Front Panel
input source and output resolution
buttons with LED status. 3-D
De-Interlacer. 3-D Comb
Filter. Compact size.
VP413 $345.00
CV & Y/C Scaler with
XGA Output on DVI-I
The VP-415 is a high performance Digital
Scaler for composite video and S-Video
(Y/C) signals. It will scale a video signal
to a selectable computer graphics video
on a DVI-I analog and Digital connector.
Multi-Standard - PAL, SECAM, & NTSC
(3.58/4.43). Computer Graphics Output
Resolutions - VGA (640 x 480), SVGA (800
x 600), XGA (1024 x 768), or WXGA (1366 x
768). Control - Front Panel input source and output resolution buttons
with LED status. 3-D De-Interlacer. 3-D Comb Filter. Compact Size.
VP-415 $445.00
VGA/XGA to RGBHV Converter
The VP-102xl is a high performance format converter for computer
graphics video and stereo audio signals. It will convert a computer
graphics video signal on a
15-pin HD connector to an
RGBHV video signal on BNC
connectors and provides left
and right level control for
unbalanced stereo audio.
High Bandwidth - 420MHz
(-3dB). HDTV Compatible.
EQ (Peaking) Control. Looping Input. ID Bit Control. Left and Right
audio Gain Controls. Compact Size Inputs: 1 UXGA on an HD15F
connector; 1 unbalanced stereo audio on a 3.5mm Mini Jack Outputs:
1 RGBHV on 5 BNC connectors; 1 UXGA active loop on an HD15F
connector; 1 unbalanced stereo audio on a 3.5mm Mini Jack Power
Source: 12 VDC, 142mA Dimensions: 12cm x 7.18cm x 2.42cm (4.73” x
2.83” x 0.95”), W, D, H Weight: 0.3 kg. (0.67 lbs.) approx. Accessories:
Power supply, mounting bracket Seven-Year Limited Warranty
VP-102XL $365.00
CV & Y/C Scaler with XGA and
HDTV output on DVI-I
The VP-416 is a high performance Digital
Scaler for composite video and S-Video
(Y/C) signals. It will scale a video signal
to a selectable computer graphics
video or HDTV output signal on a DVI
connector. Multi-Standard - PAL-B & NTSC
(3.58). HDTV Compatible. Input - Composite video or S-Video. Output -
DVI-I analog and Digital. Computer Graphics Output Resolutions - VGA
(640x480), SVGA (800x600), XGA (1024x768), or WXGA (1366x768). HDTV
Output Resolutions - 480p, 576p, 720p or 1080i. Control - Front panel input
source and output resolution buttons with LED status & contact closure
for input selection. 3-D De-Interlacer. 3-D Comb Filter. Compact Size.
VP-416 $495.00
CV & Y/C Scaler with XGA and HDTV output on HD15
The VP-414 is a high performance Digital
Scaler for composite video and S-Video
(Y/C) signals. It will scale a video signal to
a selectable computer graphics video or
HDTV output signal on an HD-15 connector.
Multi-Standard - PAL-B & NTSC (3.58). HDTV
Compatible. Input - Composite video or S-Video.
Output - 1 computer graphics/HDTV video on
a 15-pin HD connector. Computer Graphics
Output Resolutions - VGA (640x480), SVGA (800x600), XGA (1024x768), or
WXGA (1366x768). HDTV Output Resolutions - 480p, 576p, 720p or 1080i in
Component format on the HD-15 output connector. Control - Front panel
input source and output resolution buttons with LED status & contact closure
for input selection. 3-D De-Interlacer. 3-D Comb Filter. Compact Size.
VP-414 (has HDTV Output Resolutions) $395.00
Signal Converters - Micro
SDI Products
1:4 3G-SDI Splitter
Split one 3G-SDI signal to four 3G-SDI outputs
Features:
• Distribute one 3G-SDI source to four 3G-SDI devices
• Backwards compatible with SDI and HD-SDI signals
• Plug-and-play installation
• Distributes video without latency
Specications:
•Input/Output: SDI - SMPTE 259M-C (270Mbps);
HD-SDI -SMPTE 292M (1.485, 1.485/1.001 Gbps);
3G-SDI-SMPTE 424M/425M (2.97/3.0 Gbps)
•Supports NTSC, PAL and HD formats up to 1080p
• Input/Output Connector: BNC female
•Power Supply: 5V DC
•Power Consumption: 10 Watts (max)
• Dimensions:3.5”D x 7.5” W x 1.1”H
• Shipping Weight / Unit Weight: 2 lbs. /1 lb
3G-SDI Displays
4x
3G-SDI Device
4x1 3G-SDI Switcher
Switch between four 3G-SDI signals to
one 3G-SDI output
Features:
• Switches four 3G-SDI sources instantly without
signal degradation
• Backwards compatible with SDI and HD-SDI signals
• Front panel switching
• Discrete IR remote (included)
• Discrete switching via integrated RS-232 serial
communications
• Plug-and-play installation
• Distributes video without latency
Specications:
•Input/Output: SDI - SMPTE 259M-C (270Mbps);
HD-SDI -SMPTE 292M (1.485, 1.485/1.001 Gbps);
3G-SDI-SMPTE 424M/425M (2.97/3.0 Gbps)
•Supports NTSC, PAL & and all HD formats•
Dimensions: 7.5”W x 1.1”H x 3.5”D
• Remote Control Port: (1) DB-9; RS-232 serial
communication
• Input/Output Connector: BNC female
•Power Supply: 5V DC
• Power Consumption: 10 Watts (max)
• Dimensions: 3.5”D x 7.5” W x 1.1”H
• Shipping Weight / Unit Weight: 2 lbs. /1 lb
3G-SDI Output
4x
3G-SDI devices
DVI to HD-SDI Scaler
Convert a single link DVI signal to a
single link HD-SDI signal with scaling
Features:
• 10 bit resolution for greater precision and dynamic range
• Proprietary 10 bit motion adaptive video de-interlacing
with edge interpolation for HD / SD formats
• Advanced noise reduction and detail enhancement
• Max. active image size of 2048 samples x 2048 lines PBP
processing for various combinations of video and
graphics with alpha blending
• Fully integrated sprite based multi-plane OSD controller
• Frame conversion to/from any refresh rate
• Pattern mode w/ color bars & cross-hatch patterns
• Color correction/detail enhancement
Specications:
• Input Video Bandwidth: 165 MHz
• Output Video Bandwidth: 1.485 Gbps
• Maximum Input Resolution: 1920 x 1200 @ 24/30
• Maximum Output Resolution: 2048 x 1080 @ 24/30
• DVI Connector: DVI-I 29 pin female
• SDI/HDSDI Connector: BNC female
HD-SDI
Display
• Gamma selection
• Aspect ratio select
• French/English menu set
• RS-232 for upgradable rmware
or for IR control
• Genlock capable
Computer
• Data Port: (1) DB-9; RS-232 serial
communication
• Input/Output Connector: BNC female
• Power Supply: 5V DC
• Power Consumption: 20 Watts (max)
• Dimensions: 6.7”D x 8.4” W x 1.7”H
• Shipping Weight / Unit Weight: 4 lbs. /1 lb
EXT-3GSDI-144 $599.00
EXT-3GSDI-441 $699.00
EXTDVI2HDSDISSL $159.95
127
126
800-526-0242 800-526-0242
Signal Processing
Signal Processing