Specifications

Component Switchers
2x1 High Resolution Component Video or Audio/Video Switcher
CVG-21RCA $249.00
The Comprehensive CVG-21RCA is a versatile 2x1 high resolution mechanical Switcher that can be
used for many dierent types of signals. It switches three identical channels simultaneously, so it
may be used for composite video with 2 audio channels; for three independent composite video
channels; for one composite and one Y/C channel; for Component video (YUV or RGB), SDI, HDTV or
for any other combination. The CVG-21RCA uses an “RF” PCB design with three ultra high Bandwidth
channels, providing Bandwidth exceeding 1000 MHz (1 GHz), and is suitable for use with almost any
common signal. It is housed in a desktop enclosure and can be used in “reverse” as well - functioning
as a 1x2 Switcher (toggling one source between two acceptors). It provides a simple solution for many
switching needs and as the design is passive, it does not need power, thus increasing its versatility.
Features
• High Bandwidth - 980MHz (- 3dB).
• Mechanical (Passive) Switching - No power required.
• HDTV Compatible.
• Desktop Size - Compact size. Two units can be rack mounted
side-by-side in a 1U rack space with the optional RK-81 Adapter.
Specications
• Inputs: 2 sets consisting of 3 channels, on RCA connectors.
• Output: 1 set consisting of 3 channels, on RCA connectors.
• Bandwidth (-3dB): 980MHz.
• Dimensions: 18.8 cm x 10.2 cm x 4.4
cm (7.4” x 4” x 1.7”), W, D, H.
• Weight: 1.4 lbs. approx.
• Options: RK-81 19” rack-Adapter.
3x1 Component and Stereo Audio Switcher
AVT-5831 Component Video Router allows you connect three YPbPr Component Video and
audio sources and select which of them is routed to the output. Multiple input devices, such
as VCR’s, DVD Players, Video Game Consoles, Satellite Receivers, etc., can be connected to a
destination device without moving cables around. Input selection can be made via the Front
Panel Push Buttons or the Infrared Remote Control. No signal degradation takes place, so the
quality you put in is the same as the quality you get out. In addition of Component Video
Inputs, the AVT-5831 can also handle Analog Stereo or Toslink Optical audio for each of the
three audio Inputs and route the selected input to the respective output. · 3 Video Inputs:
YPbPr Component Video via 3x RCA connector · 3 audio Inputs: Analog Stereo audio via Mini-
Stereo and Optical audio (S/PDIF) via Toslink Connector · 1 Video Output: YPbPr Component
Video via 3x RCA connector · 1 audio Input: Analog Stereo audio via Mini-Stereo and Optical
audio (S/PDIF) via Toslink Connector · Size: 1.75” High x 9.4” Wide x 4.5” Deep · Weight: 1 lb 9 oz
(0.7g) · External 115VAC to 9VDC Power Supply Included · One-Year Limited Warranty.
AVT-5831 $99.00
Features
• 3 Video Inputs: YPbPr Component
Video via 3x RCA connector
• 3 audio Inputs: Analog Stereo audio
via Mini-Stereo and Optical audio
(S/PDIF) via Toslink Connector
• 1 Video Output: YPbPr Component
Video via 3x RCA connector
• 1 audio Input: Analog Stereo audio
via Mini-Stereo and Optical audio
(S/PDIF) via Toslink Connector
• High Video Bandwidth
• Video S/N Ratio: >50dB
• NTSC and PAL compatible
Specications
• High Video Bandwidth
• Video S/N Ratio: >50dB
• NTSC and PAL compatible
• Size: 1.75” High x 9.4” Wide x 4.5”
Deep (44mm x 238mm x 114mm)
• Weight: 1 lb 9 oz (0.7g)
• External 115VAC to 9VDC @
500mA Power Supply Included
• One-Year Limited Warranty
4x1 Component and Stereo Audio Switcher
The AVT-5841 Component Video Router is a 4-Input by 1-Output Switcher that can be used for
either YPbPr Progressive Scan Video or YCbCr Component Video, Plus Stereo audio. Selection
can be made by the front panel push buttons or by the IR Remote Control. Up to four devices
with Component Video Outputs, such as DVD Players, Video Game Consoles, HDTV Receivers or
HD Cable Boxes, can be connected to a TV Sets, HDTV Display or other devices with Component
Video Inputs, without moving cables around. The high signal Bandwidth insures no loss of video
or audio quality. Note - This unit does not transcode, so for example, a YPbPr input signal cannot
go to a YCbCr device. · 4 Component Video Inputs via RCA connectors · 4 Stereo audio Inputs via
RCA connectors · 4 Digital audio Inputs via RCA Connectors · 1 Component Video Outputs via RCA
connectors · 1 Stereo audio Output via RCA connectors · 1 Digital audio Output via RCA Connector
· Size: 1.8” High x 9.3” Wide x 6.4” Deep · Weight: 2 lbs (920g) · 115VAC to 9VDC Power Supply
Included · One-Year Limited Warranty.
AVT-5841 $79.00
Features
• 4 Component Video Inputs via RCA connectors
• 4 Stereo audio Inputs via RCA connectors
• 4 Digital audio Inputs via RCA Connectors
• 1 Component Video Outputs via RCA connectors
• 1 Stereo audio Output via RCA connectors
• 1 Digital audio Output via RCA Connector
• Works with Progressive Scan YPbPr 480p,
576p, 720p or 1080i Component Video
• Works with Interlaced Scan
YCbCr Component Video
• IR Remote or Manual Control
Specications
• Video Bandwidth: 300MHz
• NTSC and PAL compatible
• Size: 1.8” High x 9.3” Wide x 6.4” Deep
(46mm x 236mm x 163mm)
• Weight: 2 lbs (920g)
• 9VDC @ 200mA Power Consumption
• 115VAC Power Adapter Included
• One-Year Limited Warranty
Composite & S-Video Switchers
4x1 Composite Video Passive Switcher (BNC)
The 4x1VB is a high quality 4x1 mechanical Switcher designed for composite video signals using BNC connectors.
It accepts up to four Inputs and allows the user to select any input to be routed to one output using buttons
located on the side panel. High quality switching Components are used to ensure minimal Crosstalk and very high
Bandwidth. The entirely passive design of the 4x1VB eliminates the need for a power supply. Unselected Inputs are
automatically terminated via 75 resistors. 7 Year Warranty. Weight: 0.67 Lbs. Dimensions: 4.7” x 2.95” x 0.98”, W, D, H.
4x1VB $165.00
4x1S (4X1 S-Video) $165.00
4x1V(4x1 RCA) $165.00
Features
• High Bandwidth - 400MHz (- 3dB).
• Video on BNC Connectors - 4x1V has RCAs.
• Mechanical (Passive) Switching - No power required.
• Compact Design - 3 units can be rack mounted side-by-side
in a 1U rack space with the optional RK-3T rack Adapter.
Specications
• Inputs: 4 Video, 1Vpp/75Ω On BNC Connectors.
• Output: 1 Composite Or Single Component
Video, 1Vpp/75Ω On A BNC Connector.
• Bandwidth (-3Db): 400Mhz.
• Switching System: Mechanical, Break-Before-Make.
• Dimensions: 12cm X 7.5cm X 2.5cm
(4.7” X 2.95” X 0.98”, W, D, H.).
• Weight: 0.62 Lbs. Approx.
• Accessories: Mounting Bracket.
• Options: Rk-3T 19” Rack Adapter.
CVG-41AV $240.00
The Comprehensive CVG-41AV is a high quality mechanical (passive) 4x1 Switcher for composite video and stereo
audio signals. It is designed for applications requiring an unpowered unit for routing of video and stereo audio signals.
audio is always switched together with the corresponding video signal and unselected video Inputs are terminated
via 75 Ω resistors. High quality switching Components provide excellent isolation between Inputs.
Passive 4x1 Video and Stereo Audio Switcher
Features
• High Bandwidth - 520MHz (- 3dB).
• Mechanical (Passive) Switching - No power required.
• Desktop Size - Compact size. Two units can
be rack mounted side-by-side in a 1U rack
space with the optional RK-81 Adapter.
Specications
• Inputs: 4 video, 1Vpp/75Ω on BNC
connectors. 4 audio stereo, + up to
36 Vpp, on RCA connectors.
• Outputs: 1 video, 1Vpp/75Ω on a BNC
connector. 1 audio stereo, + 4dBm
typical, on RCA connectors.
• Switching System: Mechanical, “Break -
before - make”, audio - follow - video mode.
• Bandwidth (-3dB): 520MHz
(video), 100 KHz (audio).
• Crosspoints: 4 for video, 4x2 for audio,
1 set active at any given time.
• Signal Levels: Up to 3Vpp
video, + 30dBm audio.
• Dimensions (W,D,H): 18.8cm x
10.2cm x 4.4cm, (7.4” x 4” x 1.7”).
• Options: 19” Rack Adapter RK- 81.
4x1 Vertical Interval Video & Audio Switcher
The VS-421 is a high performance 4x1 Switcher for composite video and audio stereo signals. Using BNC connectors for
video and RCA connectors for audio, one of four sources can be routed to one monitor, projector, or another receiving
device. Two switching modes can be selected by a switch on the rear panel. In the vertical interval mode glitch-free
transitions are provided when sources share a common reference sync, and in the immediate mode switching takes
place instantly. Video Bandwidth exceeding 330MHz ensures transparent performance even in critical broadcast and
production applications. Exceptionally high performance also allows the VS-421 to be used for SDI (serial Digital) and
high line rate video signals.
VS-421 $575.00
Features
• High Bandwidth - 330MHz (- 3dB).
• Switching - Vertical interval or immediate (selectable).
• Control - Front panel or contact closure.
• Desktop Size - Compact size. Can be rack mounted in a
1U rack space with the optional RK-MEDN Adapter.
Specications
• Inputs: 4 Composite Video/Sdi, 1Vpp/75Ω, On
Bnc Connectors. 4 audio Stereo (Or Balanced
Mono), + 30Dbm Typ. On RCA Connectors.
• Outputs: 1 Composite Video, 1Vpp/75Ω On Bnc Connectors. 1
audio Stereo/Balanced Mono + 30Dbm Typ. On RCA Connectors.
• Video Bandwidth (-3Db): 330Mhz.
• Audio Bandwidth (-3Db): 50 Khz.
• Non Linearity: 0.1%.
• Di. Gain: 0.1%.
• Control: 4 Front Panel Touch Switches, Contact Closure.
• Di. Phase: 0.03Deg.
• K-Factor: 0.05%.
• Luma S/N: > 71Db.
• Switching: Vertical Interval Or Immediate.
• Video Crosstalk: -65Db (Sync).
• Dimensions: 24.5cm X 18cm X 4.5cm (9.6” X 7” X 1.7”, W, D, H.).
• Power Source: 230 Vac, 50/60 Hz, (115Vac U.S.A.) 4.6 Va.
• Weight: 3.1 Lbs. Approx.
• Accessories: Power Cord.
• Options: Rack Mount Kit Model Rk-Medn.
2x1 Composite Video & Stereo Audio or Component Video Switcher
The VS-21B is a high performance Switcher for composite video and stereo audio or Component video signals.
VS-21B $250.00
Features
• High Bandwidth - 700MHz (-3db)
• Inputs (2) - 1 BNC and 2 RCAs each
• Output - 1 BNC and 2 RCAs
• HDTV Compatible
• Mechanical (Passive) Switching -
No power required
• Desktop Size - Compact size. Two units can
be rack mounted side-by-side in a 1RU rack
space with the optional RK-81 Adapter
Specications
• Inputs: 2 sets of composite video, each on a BNC connector, and 2 sets of
unbalanced stereo audio, each on RCA connectors, or 2 sets of Component
video (YUV) each on a BNC connector and 2 RCA connectors
• Output: 1 set of composite video on a BNC connector, and
unbalanced stereo audio on RCA connectors, or 1 set of Component
video (YUV) on a BNC connector and 2 RCA connectors
• Bandwidth (-3dB): 700MHz
• Video Crosstalk (All Hostile): 51Db@5Mhz
• Controls: Channel Selector Via Push Button On Front Panel
• Switching System: Mechanical, “Break-Before-Make”
• Power Source: Not Fed - Mechanical
• Dimensions: 18.8Cm X 10.2Cm X 4.4Cm (7.4” X 4” X 1.7”), W, D, H
• Options: RK-81 19” Rack Adapter
107
106
800-526-0242 800-526-0242
Switchers
Switchers