Specifications

PAA-652 Mono Audio Distribution Amp
The input is balanced bridging, but can be terminated into 150 or 600
ohms. An unbalanced input is converted to balanced
outputs. The transmission path is virtually transparent.
100dB S/N ratio and .05 dB frequency response from
20Hz - 20KHz. Isolation between modules is greater
than 100dB. A gain control allows for gain adjustment
of ±16dB.
PAA-60 2x4 Stereo or 1x8 Mono Audio DA
◆ Used as a 1x8 Mono DA or a 1x4 Stereo DA via DIP switch.
◆ Use it as a two channel mixer with simple LED metering; as a visual
audio presence monitor (produces sufficient
output to drive headsets or ear pieces); as an
adjustable Intercom IFB amp with local (talent)
control and talent alert (clip indication). Also
compatible with most intercom systems for
power and level requirements.
◆ The PAA-60 can interface unbalanced sources to balanced feeds. Both
channels have gain-up switches to accommodate -10 dBm inputs. Can
also interface +4 dBm balanced to -10 dBm unbalanced.
◆ Each channel has signal metering LED.
◆ Powered via AC or +25-35v DC
◆ Gain controls for each channel may be adjusted from - to +9dB
(+24dBm with gain).
PAA-60 Analog Audio DA
(Mfr # PAA60 • B&H # LIPAA60).............................189.95
PCD-88 Portable Closed Caption Decoder
Capable of processing and displaying all standard
line 21 closed-captions and text on field one.
Operating modes are selectable from a four-
position rotary switch. Four LEDs indicate which
channel is selected. An automatic caption
“Time- Out” function erases displayed captions
after 15 seconds if no new data is received. Can easily be mounted
adjacent to a video monitor (without a built-in closed caption decoder).
The required input signal is composite video with caption data on line
21 of field one. There are two BNC composite video outputs. The input is
high impedance looping configured as single ended, AC coupled, to
work in all environments. A regulated 12v DC power supply is required.
Three internal controls provide for adjustment of composite video level,
background level and character intensity. Housed in a high impact
plastic case for durable operation in the field or in the studio.
PCD-88 Closed Caption Decoder
(Mfr # PCD88 • B&H # LIPCD88) ..............219.95
STUDIO EQUIPMENT
LINK ELECTRONICS
974
PORTABLE SERIES
PCN-40 S-Video to Composite Converter
Small and lightweight ( 5 oz.) in a high-impact plastic case, the PCN-40
encodes an S-Video signal, and outputs two composite video signals via
BNCs. The signal is fully buffered and capable of
driving long cable runs. An onboard voltage
regulator allows it to be powered from an
external AC or DC supply.
◆ Output level trim on the front panel.
◆ Y/C inputs are single-ended and AC coupled.
◆ Internal jumpers allow the input grounds to be AC coupled to the
circuit ground as well, eliminating the possibility of ground loops.
PCN-40 Composite Converter
(Mfr # PCN40 • B&H # LIPCN40) .......................89.95
www.bhphotovideo.com
PHOTO - VIDEO - PRO AUDIO
PVA-50 1x4 Video Distribution Amplifier
Designed for field use, the PVA-50 is a portable
video distribution amplifier housed in a
durable high-impact plastic case. On-board
voltage regulator allows it to be powered from
an external AC or DC supply. Can be powered
by the same source, that powers your cameras.
◆ A front panel control adjusts for ±3dB gain
◆ Weighs only 5 oz., making it ideal for field operations.
PVA-50 Distribution Amplifier
(Mfr # PVA50 • B&H # LIPVA50) ....................124.95
1RU Audio & Video Distribution Systems
The 200 Series consists of the the PFM-210 video frame accommodating up to
4 PVA-152 video DA modules, and the PFM-220 audio frame accommodating up
to 4 PAA- 652 audio DA modules. Each module has 8 outputs when operating in
their respective frame allowing a video or audio input to be looped for 32 video or mono audio outputs when the frames are loaded with 4 modules.
By using two modules for right signal and two modules for left, the PFM-220 will provide sixteen stereo outputs. The PFM-210 rear panel connectors
are BNC and the PFM-220 are captive screw clamp terminals. The 200 Series is ultra stable and extremely reliable for all applications.
PVA-152 Video Distribution Amp
The PVA-152 offers transparent transmission
with a frequency response of greater than
40MHz. A differential amplifier on the input
is standard and provides more than 70dB of
common mode rejection. Internal jumpers
select AC or DC coupling. A master gain control
on the front panel adjusts the video level from -2dB to +6dB.
PFM-210 (Mfr # PFM210 • B&H # LIPFM210): 200 Series VideoLink Mounting Frame for PVA-152 Video Distribution Amplifiers......................................................459.95
PFM-220
(Mfr # PFM220 • B&H # LIPFM220): 200 Series AudioLink Mounting Frame for PAA-652/1Audio Distribution Amplifiers...............................................459.95
PVA-152
(Mfr # PVA152 • B&H # LIPVA152):1x8 Video DA Module ...............117.95 PAA-652 (Mfr # PAA-652/1 • B&H # LIPAA6521):1x8 Audio DA Module .......169.95