Specifications

STUDIO EQUIPMENT
KRAMER
965
COMPOSITE & S-VIDEO DAs
[phone] • 1-800-947-9901• Quick Dial 821
PHOTO - VIDEO - PRO AUDIO
VM-50H
1:5 Headphone Distribution Amplifier
The VM-50H is a distribution amplifier for headphone signals. It takes one
stereo headphone input and distributes the signal to five identical stereo
headphone outputs. Features mono/stereo input selection and Level
(Gain) controls for each output. Compact, two units can be rack mounted
side-by-side in a 1U rack space with the optional RK-50RN adapter.
VM-50H
(Mfr # VM-50H • B&H # COVM50H)..................................................................Call
VM-5AD
1:5 Balanced Audio Distribution Amplifier
The VM-5AD is a high performance DA for balanced mono or unbalanced
stereo audio signals on XLR connectors. It takes a mono or stereo input
and distributes the signal to five identical outputs. Features Level (Gain)
controls, mic or line input level selection, and balanced/unbalanced
input selection. Can be rack mounted (1RU high) with the optional
RK-MEDN adapter.
VM-5AD
(Mfr # VM-5AD • B&H # COVM5AD).................................................................Call
VM-1110XL
1:10 Balanced Audio Distribution Amplifier
The VM-1110XL is a high performance DA for balanced mono audio
signals on XLR connectors. It can also be configured as a 1:5 distribution
amplifier for stereo balanced audio signals. Features Level (Gain) con-
trols. Rackmountable (1RU high).
VM-1110XL
(Mfr # VM-1110XL • B&H # COVM1110XL) ....................................................Call
VP-108
1:8 VGA/XGA Audio Distribution Amplifier
with Output Disable
The VP-108 is a high performance computer graphics video amplifier
with resolutions ranging from VGA through UXGA and higher, and
balanced stereo audio signals. It takes one computer and a balanced
stereo audio input and will output to eight computer and balanced
stereo audio signals. HDTV compatible with high bandwidth of 400
MHz, it features RS-232 control, looping input, audio level (Gain)
controls and selectable input signal termination. Rackmountable
(1RU high).
VP-108 (Mfr # VP-108 • B&H # COVP108)..................................................................Call
VP-6A
1:6 Computer Graphics A/V DA with Twisted Pair Transmitter
The VP-6A is a high performance video DA for computer graphics video
signals with resolutions ranging from VGA through UXGA and higher
with balanced or unbalanced stereo audio signals. It takes one input,
provides correct buffering and isolation, and distributes the signal to 6
computer graphics video outputs on 15-pin HD connectors and one AV
twisted pair output on an RJ-45 connector.
HDTV compatible with high bandwidth of 500 MHz, it features balanced
or unbalanced stereo input with 12 live outputs (6 balanced and 6
unbalanced). and left and right audio level controls. Also features ID Bit
and EQ (Peaking) control, and horizontal and vertical polarity selection.
System range is up to 300’. Rackmountable (1RU high).
VP-6A
(Mfr # VP-6A • B&H # COVP6A) ..........................................................................CALL
VM-1120
1:10 Balanced Stereo Audio Distributor
A high performance DA for balanced mono audio signals on XLR
connectors. It can also be configured as a 1:10 DA for stereo balanced
audio signals. Features grouped audio level controls. Configurable as
1:20 (mono) or 1:10 (stereo) DA. Rackmountable (2RU high).
VM-1120
(Mfr # VM-1120 • B&H # COVM1120) ..............................................................Call
VM-50H
VM-5AD
VM-1110XL
VM-1120
VGA DISTRIBUTION AMPLIFIERS