Specifications

STUDIO EQUIPMENT
HORITA
941
[phone] • 1-800-947-9901• Quick Dial 821
PHOTO - VIDEO - PRO AUDIO
LED DISPLAY LTC & VITC READERS/GENERATORS
VLR-100 • VLR-100PC
VITC/LTC Reader, LTC Generator
Same combination
high-speed VITC and
LTC time code reader
as the TCD-100, the
VLR-100 also generates
LTC time code. It has a .56” high 8-digit LED display readout with
brightness control. Otherwise the same, the VLR-100PC communicates
with a PC via RS-232 and includes TC-TOOLKIT tape logging software.
Same features as the TCD-100, PLUS—
◆ Front panel switches for selecting time code or user bit data display,
display run-hold operation, RDR/GEN/SET, and VITC/LTC, or “auto”
mode which uses VITC as backup when reading LTC
◆ Outputs DF/NDF TC time code and/or translates VITC into LTC
VLR-100
(Mfr # VLR100 • B&H # HOVLR100) .........................................................649.95
VLR-100PC
(Mfr # VLR100PC • B&H # HOVLR100PC) ...........................................749.95
TCD-100 VITC/LTC Reader/LED Display
The TCD-100 is a combination
high speed LTC and VITC time
code reader with 0.8” high
LED character display suitable
for viewing across a room. Reads
LTC from 1/30 to 100x play speed (forward/reverse), and VITC from
pause to over 30x (depending on tape format).
◆ “Auto” select mode permits unattended operation by automatically
switching to VITC when LTC is not available
◆ Displays hours, minutes, seconds, and frames, plus indicators for VITC
or LTC, and drop/non-drop frame format.
◆Switch select time code/user bit display, display run/hold
◆ Brightness control adjusts display intensity for indoor use in a
darkened room, or for outdoor use in bright light
◆ Outputs 2v P-P reshaped LTC when reading LTC
TCD-100
(Mfr # TCD100 • B&H # HOTCD100) .......................................................469.95
TIME CODE TOOLKIT TAPE LOGGING SOFTWARE
The field proven TC-TOOLKIT tape logging software included with the TRG-50PC, VWG-50PC, VLT-50PC, VLR-100PC and PR232, operates with
Windows 98, 2000, NT and XP. Toolkit programs are easy to understand and operate. Includes serial cable.
TC-CALC: time code calculator with separate tape timer does all drop/
non-drop-frame and film foot-frame math, imports and exports timecode,
user bits and other calculator values directly into and out of word processor
documents, database or spreadsheet fields, etc.
TG-SET: Use with TRG-50PC and VLR-100PC (only) to quickly preset generator
time code and user bits from keyboard; single key to set time code to PC’s
real-time clock time, user bits to date; start/stop generator; turn display On/Off.
MTG-TIME: Synchronizes a PC’s time and date (optional) to UTC or any local
time via a SMPTE time code input from the GPS-MTG GPS-based master time
code generator or other “time of day” code source.
TR-100 LTC Time Code Reader
The TR-100 is a search speed
LTC reader featuring an
adjustable brightness 0.8”
high LED character display,
making it suitable for use in
bright light or in a dimly lit studio. The large characters also allows for
up close or across the room viewing. The TR-100 also translates LTC
time code into MIDI Time Code (MTC) for use in A/V applications.
◆ Reads at speeds from1/30 to 10x play speed, forward and reverse
◆ Auto selects between 24 fps (film), 25 fps (PAL), 29.97 (NTSC drop
frame) and 30 fps (audio) time codes
◆ Outputs MIDI time code (MTC) for A/V sync tasks
◆ Outputs 2-volt p-p reshaped LTC for downstream equipment
TR-100
(Mfr # TR100 • B&H # HOTR100) ................................................................429.95
PC-LOG: captures time code or user bits and calculates
durations with a single keystroke. Log tapes while reading
or generating time code, add comments, print, disk I/O,
search for keywords or phrases using wildcard characters,
print “search” report”. Ten “Macro Keys” permit single
keystroke to capture time; insert any pre-typed message
of up to 34 characters. Scene/Take counter macro key
operates with special IN/OUT macro keys to tag entries
and auto increment take counter. Converts PC-LOG files
into standard CMX-340 EDL format, or into comma
delimited files for import into a database.
TCC-100
Dual Input Time Code Comparator
The TCC-100 reads and
compares two LTC
inputs and displays their
difference on an LED
display. Use to monitor or
verify proper operation of various time code equipment, or to display
the time offset between two time code sources.
◆ Compare Hrs/Min/Sec/Frame ‘coarse’ or .1/.01 Frame fine resolution.
◆ Green LED "Match" indicator and GPI out with selectable 0, 1/2, or 1
frame tolerance.
◆ Display time code or user bits for two separate time code inputs
TCC-100
(Mfr # TCC100 • B&H # HOTCC100).........................................................419.95