Specifications

STUDIO EQUIPMENT
HORITA
939
LTC TIME CODE
[phone] • 1-800-947-9901• Quick Dial 821
PHOTO - VIDEO - PRO AUDIO
MWG-50 Multiple Window Generator
An economical solution when you need to make up to four independent time code
window burns from a single LTC input source. The MWG-50 reads time code at play
speed and keys the resultant video display into four independent composite video
signals. The MWG-50 d
isplays time code or user-bits; displays drop-frame or non-
drop-frame time-code.
◆ Select from eight preset horizontal and vertical display positions and sizes;
select black mask on or off.
The RLT-50 translates RS-422 time code from any machine with 9-pin remote
control connector into standard SMPTE LTC time code. Use when LTC isn’t directly
available from machine for operating audio synchronizers, making LTC copies or
use with other Horita LTC products to make window dubs, log source tapes, etc.
◆ Operates “stand alone” or inline with edit controller - includes DB-9 cable.
◆ LTC output genlocked to video from VCR.
◆ Switch selectable front panel preset of user bits.
◆ Provides LTC time code at all tape speeds. Selectable forward direction only or
forward/reverse direction LTC output format.
◆ Switch selectable –1 frame “search offset” when translating at search speeds or
at still frame compensates for the +1 frame “on-time” updating done by many
downstream LTC readers, edit controllers and other LTC product.
GPI-50 TC-Based Dual
General Purpose Interface
A time code “coincidence detector”, the GPI-50
features two separately programmable GPI “trigger”
outputs which occur when the input time code
matches that of previously set GPI IN and OUT times.
◆ Use in video production and playback systems to
operate switchers, mixers, initiate VCR recording or
playback, operate strobe lights, trigger scientific
experiments, etc.
◆ Pushbutton switches to “MARK”, “TRIM”, or “SET” IN
and OUT times, plus a search speed SMPTE time code reader.
◆ “TRIM +/-“ and “SET IN/OUT” functions allow times to be adjusted by
+/- 1-frame, 1-second, or 1-minute, or set to any arbitrary value.
◆ "On Screen" display readout shows GPI selected, enabled/disabled,
event duration, IN/OUT times marked, and relationship of times to
present (tape) time.
◆ Separate ENABLE and DISABLE for each GPI event. GPI-1 repeats
every hour, GPI-2 repeats every 24 hours.
◆ Output signals can be either a pulldown to ground for the duration
of the event, or a pulse at the IN and OUT times.
◆ All times and selections stored in non-volatile memory.
GPI-50
(Mfr # GPI50 • B&H # HOGPI50) ............................................................................ 399.95
TCW-50 Keyboard
Time Code “Wedge”
The TCW-50 reads LTC time code and sends
the information to the PC as though it were
typed in at the keyboard. It connects between
the PC and keyboard, and is intended for
applications requiring direct input of time
code values into user programs. Because there
is no “wedge” PC software involved, the
TCW-50 is compatible with any computer,
operating system, or software program. The
only requirement is a PC-compatible keyboard.
◆ Separate push button switches for sending Time-Code or User Bit
values to the PC and for clearing previous entries.
◆ Switch selectable delimiters for: field separator, drop-frame indicator
and end of line terminator
◆ Learn mode lets you define keyboard “hot keys” that make the
TCW-50 send Time-Code or User Bit values to the PC.
◆ Outputs 2V P-P reshaped Time-Code for passing to other units
◆ Bypass switch places TCW-50 into Active or Bypass mode
◆ Powered through keyboard cable. Includes 1’ and 5’ cables for
connecting between PC and keyboard.
TCW-50
(Mfr # TCW50 • B&H # HOTCW50)..................................................................... 329.95
RLT-50 (Mfr # RLT50 • B&H # HORLT50)
RS-422 to LTC Time Code Translator...............................394.95
RLT-50RM
(Mfr # RLT50RM • B&H # HORLT50RM):
Rackmounted version of the RLT-50. Supplied 19” RM-50
rack (1RU high) holds three units..................................... 369.95
RLT-50 RS-422 to LTC Time Code Translator
MWG-50 (Mfr # MWG50 • B&H # HOMWG50) ............................ 1029.95
GPI-50
TCW-50