Specifications

STUDIO EQUIPMENT
COMPREHENSIVE
918
SWITCHERS
www.bhphotovideo.com
PHOTO - VIDEO - PRO AUDIO
CVG-FW4x4
4x4 Firewire Passive Switcher
Designed for today’s
multimedia applications,
the CVG-FW4x4 accepts up
to four 6-pin firewire inputs
and will output to any one
of the four 6-pin outputs.
It features mechanical
break-before-make switch-
ing, and is compatible with devices up to 400 MB/s. The CVG-FW4x4
does not allow more than one input or one output to be used at a time
and it cannot distribute to multiple outputs simultaneously. Comes in
a rugged metal enclosure, and does not require any power source,
therefore perfectly suitable for fieldwork.
(Mfr # CVG-FW4X4 • B&H # COCVGFW4X4) ..................................................................CALL
CVG-21RCA
2x1 High Resolution Audio/Video/Component Switcher
A versatile 2x1 high
resolution mechanical
switcher that can be
used for many types
of signals. It switches
three identical channels
simultaneously, so it
may be used for
composite video with
2 audio channels; for three independent composite video channels; for
one composite and one Y/C channel; for component video (YUV or
RGB), SDI, HDTV or for any other combination. The CVG-21RCA uses an
‘RF’ PCB design with three ultra high bandwidth channels, providing
bandwidth exceeding 1000 MHz (1 GHz), and is therefore suitable for
use with almost any common signal. It is housed in a desktop enclosure
and can be used in reverse as well - functioning as a 1x2 switcher
(toggling one source between two acceptors).
(Mfr # CVG-21RCA • B&H # COCVG21RCA)................................................................158.50
CVG-41AV
4x1 Composite Video & Audio Passive Switcher
The CVG-41AV is a
mechanical (passive) 4x1
switcher for composite
video and stereo audio
signals. Audio is always
switched together with
the corresponding video
signal and unselected
video inputs are terminated via 75 ohm resistors. High quality switching
components provide excellent isolation between inputs. Recommended
for all non-critical switching applications.
(Mfr # CVG-41AV • B&H # COCVG41AV).........................................................................CALL
CVG-606XL • CVG-808XL
6x6 and 8x8 Vertical Interval
Video & Audio Matrix Switchers
These broadcast quality,
high-resolution 6x6 and
8x8 video and stereo
audio matrix switchers
have vertical interval switching provides glitch free switching between
genlocked sources. They can switch stereo audio signals in audio-
follow-video mode or separately (breakaway). They have manual,
RS-232 and RS-485 controls, and may be simultaneously controlled in
all modes. Several pre-sets may also be stored in the machine for quick
retrieval. They also have a TAKE control button allowing you to preset
and switch all crosspoints at once. There is an external sync/genlock
input as well and may be programmed to use this input or source
number one. CVG-Windows control software is provided.
6x6 Switcher
(Mfr # CVG-606XL • B&H # COCVG606XL) .......................................CALL
8x8 Switcher
(Mfr # CVG-808XL • B&H # COCVG808XL) .......................................CALL
CVG-81AV • CVG-81AS
8x1 Composite & 8x1 S-Video Passive Switchers w/Audio
The CVG-81AV
and CVG-81AS
are passive
(contain
no active
electronics) 8x1 composite or S-video and stereo audio mechanical
switchers. Housed in a professional 19” rackmountable enclosure, the
are recommended for non-critical applications.
8x1 Composite Switcher
(Mfr # CVG-81AV • B&H # COCVG81AV) ...................CALL
8x1S-Video Switcher
(Mfr # CVG-81AS • B&H # COCVG81AS) ..........................CALL
CSC-550
Composite, S-Video, Component Scaler with HDTV & XGA
A high performance digital
scaler for composite,
S-Video and component
(480i) video signals. It will
scale a video input signal
to a selectable computer
graphics video or HDTV
output signal on an HD-15
connector. It has multiple computer graphic output resolutions of
640x480, 800x600, 1024x768 and 1280x1024. It also has HDTV output
resolutions of 480p, 576p, 720p, and 1080i in component format on the
HD-15 output connector. Compatible with NTSC and PAL and 4x3/16x9,
has a built-in proc-amp for color, hue (NTSC only), sharpness, contrast,
and brightness. Also has a 3D comb filter, and 3:2 pull down video
processing with auto detection. Has digital noise reduction, with on-off
selectability. Has computer graphics/HDTV (15-Pin HD) pass-thru, flexib
on-screen menus). (Mfr # CSC-550 • B&H # COCSC550) ...................................359.95