Specifications

STUDIO EQUIPMENT
COMPREHENSIVE
915
DISTRIBUTION AMPLIFIERS
[phone] • 1-800-947-9901• Quick Dial 821
PHOTO - VIDEO - PRO AUDIO
CDA-CV20
1x2 Component Video Ditribution Amplifier
HDTV compatible, the CDA-CV20 is a high
performance distribution amplifier for
component video (RGB/YUV) signals. It
takes one input (RCA), provides correct
buffering and isolation and distributes
the signal to 2 identical outputs (RCA).
Has high bandwidth of 500MHz (-3db).
(Mfr # CDA-CV20 • B&H # COCDACV20)....................................................................109.95
CVG-CVA2LD • CVG-SVA2LD
1x2 Composite and 1x2 S-Video Line Amps w/Audio
The CVG-CVA2LD and CVG-SVA2LD
are high performance video and
stereo audio line drivers capable of
sending a composite (CVG-CVA2LD)
or an S-Video (CVG-SVA2LD) signal
with stereo audio up to 500 feet when
used with premium cable. Both
provide separate cable equalization
of ±5dB for each of the 2 video outputs, and compensate for signal
level and high frequency losses that occur over long cable runs. Stereo
audio may be input on either two RCA jacks or one stereo 3.5mm mini
jack, which then outputs two sets (L&R) of balanced or unbalanced
stereo audio. They run on a 9v AC/DC source, so they are therefore
perfectly suitable for fieldwork.
CVG-CVA2LD
(Mfr # CVG-CVA2LD • B&H # COCVGCVA2LD) .................................CALL
CVG-SVA2LD
(Mfr # CVG-SVA2LD • B&H # COCVGSVA2LD) ..................................CALL
CVG-DA2CS
1x2 High Resolution Composite and S-Video DA
This high resolution
composite/S-Video
and stereo audio DA
is designed for
analog and digital
applications. It splits
a single composite or
S-Video input source
into two identical outputs, as well as a single stereo audio input source
into two identical outputs. Front panel controls include 3 sets of video
equalization and gain controls; one set for composite, one set for S-Video
and one set for audio. The gain controls for S-Video allow individual
adjustment of both the Y and C signals which is especially helpful for
signal delay compensation inherent to S-Video signals over long runs.
This allows you to adjust the video and audio signal output to the
application for maximum flexibility. Can be rack mounted with an
optional rack mount kit.
(Mfr # CVG-DA2CS • B&H # COCVGDA2CS)...................................................................CALL
CVG-3AVB1x3 Audio and Video Distribution Amp
A high performance 1x3 DA
for video (BNC) and stereo
audio signals. It is typically
used for composite video
sources, but video band-
width exceeding 430MHz allows it to be used for high-resolution data/
video signals, SDI video, and other specialized signals. Includes a button
control for audio level as well as trimmers for controlling video level
and cable EQ accessible via the front panels. Housed in a convenient
small enclosure for desktop use, but can also be rack mounted using
the RK-50R kit, which holds two units in a 19” rack. Runs on an external
12v DC source, and is therefore suitable for fieldwork as well.
(Mfr # CVG-3AVB • B&H # COVM30AVB) .......................................................................CALL
CVG-3SXL1x3 S-Video Distribution Amplifier
The CVG-3SXL is a high
performance distribution
amplifier for S-Video
signals. It takes one input,
provides correct buffering
and isolation, and distributes the signal to three identical outputs.
(Mfr # CVG-3SXL • B&H # COCVG3S).............................................................................CALL
CVG-3VXL1x3 Composite Video Distribution Amp
A 1x3 composite video
distribution amplifier for
field, studio and other
demanding applications.
Splits a single input into
three identical outputs with no discernible signal degradation.
Video output and input signals are AC coupled for maximal flexibility.
Receives external 12v DC feed, and is housed in a compact enclosure,
making it ideal for field use.
(Mfr # CVG-3VXL • B&H # COCVG3V) ...................CALL
CVG-4A • CVG-SV4A
1x4 Composite and 1x4 S-Video DAs
High resolution
composite (CVG-4A)
and S-Video (CVG-
SV4A) and stereo
audio DAs, they split a
single composite or S-Video, or serial digital input source into four iden-
tical outputs with no discernable signal degradation. They also split a
single stereo audio input source into four identical outputs. Front panel
controls include video equalization and gain controls which allow the
user to adjust the video signal output to the application. Left and right
audio gain controls are also featured on the front panel for maximum
flexibility. Durable metal enclosure ensures long product life and they
can be rack mounted with optional rack mount kit.
CVG-4A
(Mfr # CVG-4A • B&H # COCVG4A) ..............................................................CALL
CVG-SV4A
(Mfr # CVG-SV4A • B&H # COCVGSV4A).................................................CALL