Specifications

STUDIO EQUIPMENT
MIRANDA
1006
DVI-RAMP
2
www.bhphotovideo.com
PHOTO - VIDEO - PRO AUDIO
◆ Dual Head or Dual Link DVI with loop
through up to 2560 x 1600
◆ Up to16-bit per component when using two
DVI channels for high resolution color
depths
◆ Can be externally synchronized with an ana-
log reference (SD or HD) or can free run on
its internal frequency-accurate time base.
◆ For convenience and flexibility, configura-
tion and control of the DVI-Ramp2 can be
done via USB, RS-232 or Ethernet (check
availability). Firmware updates through USB
or RS-232 only.
◆ The DVI-Ramp
2
is packaged in a free-stand-
ing case, suitable for installation on a desk.
Two units can be installed side-by-side on
a 1RU tray for rack mounting, using the
optional TRAY-120.
Graphic to HD/SD video interface with four operating modes:
Single Extraction - Pixel-to-Pixel mode: The DVI-Ramp
2
can process up to 16 bits per component
when Dual Head or Dual Link DVI is used.
Dual Extraction - Pixel-to-Pixel mode: The 2 channels are supplied using a Dual Head DVI
connection. Pixel-to-pixel extraction enables the highest possible quality by eliminating any
perceptible scaling artifacts.
Single Extraction - Scaling mode: A sizeable and positionable window is used to specify which
section of the original PC graphic image will be scaled up or down to fit the targeted SDI
resolution. Built-in anti-flicker circuitry eliminates most of the flickering when the SDI output is
interlaced.
Dual Extraction - Fill & Key mode: The DVI-Ramp
2
can process and supply a Fill & Key signal to an
external keyer using up to 12-bits per component for professional, high-resolution color depths.
Fill and Alpha (key) graphics content are provided by the PC through the 2 DVI inputs of the unit
(Dual Head operation).
Graphic to HD/SD Video Interface
The DVI-Ramp2 performs live extraction of computer graphics to generate
HD/SD video for post-production, broadcast and digital cinema. It operates in
four modes including scaled graphic to video output, pixel-to-pixel extraction,
and HD/SD fill plus key output. The interface can accept Dual Head or Dual Link
DVI, with up to 16-bit per component. It features graphic to video scaling with
anti-flicker and detail enhancement. The unit features many synchronization modes, including framesync, genlock,
“soft genlock” and free run. The “soft genlock“ allows the synchronization of a regular graphics card with no reference
input. Configuration and control of the DVI-Ramp2 is via Ethernet, USB or RS-232.
DVI-RAMP
2
DVI-to-HD/SDI Video Interface
(Mfr # DVIRAMP2 • B&H # MIDVIRAMP2): DVI, RGBHV,
HD/SDI interface...........................................4699.95
DVI-RAMP
2
DSK DVI-to-HDTV/SDTV Video
Port
(Mfr # DVIRAMP2DSK • B&H # MIDVIRAMP2DS): DVI
to HD/SDI video interface with DSK ......5619.95
1RU Support Tray
(Mfr # TRAY120 • B&H # MITRAY120)
Enables two DVI-RAMP
2
or DVI-RAMP
2
DSK
units to be rack-mounted ............................149.95
FEATURES
TRAY-120