Instruction Manual

RGBHV/Stereo Audio Matrix Switcher
14
16、Clear the preset command [Y]: Clear[Y].
Example: To clear the preset command No.5. Run Command: “Clear5.”
9. Technical Specifications
Video Input Video Output
Input 8 RGBHV Output 8RGBHV
Input Connector Female BNC Output Connector Female BNC
Return Loss <-30dB@5MHz Return Loss -30dB@5MHz
Input Level 0.5 ~ 2.0Vp-p Output Level 0.5 ~ 2.0Vp-p
Input Impedence 75Ω Output Impedence 75Ω
DC Offset 1.5V Switching Type Vertical interval
Video General
Gain 0 dB Bandwidth 450MHz (-3dB), fully load
Video Signal
RGBHV, RGBS, RGsB,
RsGsBs, component video,
S-video, and composite video.
Video Type
RGBHV, RGBS, RGsB,
RsGsBs, component video,
S-video, and composite video .
Switching Speed 200ns (Max.) Crosstalk <-80dB@5MHz
Audio Input Audio Output
Input 8 stereo, balanced/unbalanced Output 8 stereo, balanced/unbalanced
Input Connector
Captive screw connectors, 5
pole
Output Connector
Captive screw connectors, 5
pole
Input Impedance >10KΩ Output Impedance 50Ω
Audio General
Frequency
Response
20Hz ~ 20KHz
CMRR >90dB@20Hz~20KHz
Stereo Channel
Separation
>80dB@1KHz
THD + Noise
0.03%@1KHz at nominal
level
Control Parts
Serial Control Port
RS-232, 9-pin female D
connector
Pin Configurations 2 = TX, 3 = RX, 5 = GND
IR Remote Default IR remote
Front Panel
Control
Buttons
Options TCP/IP control by PTNET(PTN's programmable interface)
General
Power Supply 100VAC ~ 240VAC, 50/60Hz
Power
Consumption
30W
Temperature
-20 ~ +70
℃
Humidity 10% ~ 90%
Case Dimension
W483 x H87 x D260mm
(2U high, full rack wide)
Product Weight 4.5Kg