Instruction Manual

Presentation Switcher / Scaler Buttons
12
7 Presentation Switcher / Scaler Buttons
The CSC-7850 includes the following front panel buttons:
 Nine INPUT selector buttons, see section 7.1
 A PIP button, see section 7.2
 BLANK and FREEZE buttons
 Six OSD buttons
 A RESET TO XGA/720p button
 A PANEL LOCK button, see section 7.3
7.1 Switching an Input
Each INPUT SELECTOR button can be used to select the source.
You can switch seamlessly
1
between each input that is connected to a source,
by pressing the appropriate INPUT SELECTOR button.
7.2 The PIP Button Feature
The Picture-in-Picture inserter (PIP) uses image insertion technology to
present video and graphic sources simultaneously
2
. You can display:
 An inserted video source
3
PIP over a graphic source
4
display
 An inserted graphic source
4
PIP over a video source
3
display
Three types of PIP insertions are available:
 Picture-in-Picture – the PIP image appears over the background image
 Picture + Picture – both the video source and the graphic source are placed side
by side and have the same height (the PIP image is stretched lengthwise)
 Split – both the video source and the graphic source are placed side by side (the
PIP image appears smaller than the defined size and the source size is reduced)
1 FTB™ switching for glitchless transitions between inputs
2 Since the HDMI signal is HDCP protected, an HDMI signal cannot appear on a display that is not HDCP compliant
3 That is, composite video, s-Video or component video
4 That is, HDMI, USB or VGA