Instruction Manual

Your Presentation Switcher / Scaler
7
Table 2: Rear Panel Presentation Switcher / Scaler Features
# Feature Function
21 Y/CV
22 P B /C
23
UNIV. IN RCA
Connectors
(from 1 to 4)
P R
Connect to the video acceptor which can be either composite
video (Y/CV), s-Video (Y/CV, P B /C ) or component video (Y/CV,
P B /C, P R )
24 UXGA 2 IN HD15 Connector Connects to the UXGA (analog interface) graphics source 2
25 UXGA 1 IN HD15 Connector Connects to the UXGA (analog interface) graphics source 1
26 HDMI 1 IN Connector Connect to the HDMI 1 source
27 L, S/PDIF Connect to the left unbalanced stereo analog audio source;
Alternatively, connect to a digital audio source
28
AUDIO IN UNIV. IN
RCA Connectors
(from 1 to 4)
R Connect to the right unbalanced stereo analog audio source
29 HDMI 2 IN Connector Connect to the HDMI 2 source
30 HDMI OUT Connector Connect to the HDMI acceptor
31 UXGA OUT HD15 Connector Connects to the video acceptor that displays the scaled output
In the default HDTV mode, the signal goes out via 3 PINS: PIN
1 is P
r
, PIN 2 is Y, PIN 3 P
b
32 UXGA 1 Connects to the unbalanced stereo analog audio source 1
33
AUDIO IN 3.5 Mini
Jack
UXGA 2 Connects to the unbalanced stereo analog audio source 2
34 RS-232 9-pin D-sub Connector Connects to PC or Serial Controller
35 L Connect to the left unbalanced stereo analog audio acceptor
36 R Connect to the right unbalanced stereo analog audio acceptor
37
AUDIO OUT RCA
Connectors
S/PDIF Connect to a digital audio acceptor
38 Power Connector with Fuse AC connector enabling power supply to the unit