User Manual

7
6.4. Remote Control
1. POWER
Press the button once to power
on the unit. Press again to enter
4
standby mode.
2
1
2. INPUT
3 5
Press the button repeatedly to
toggle through various input
6
sources.
3. HD INPUT
8 7
Press the button to directly select
component input.
10
9
4. PC INPUT
Press the button to directly select
PC input.
5. HDMI/DVI INPUT
Press the button to directly select
DVI (or HDMI) input.
11 12
6. OUTPUT RESOLUTION
Press appropriate button to directly select the preferred output
resolution. Other output resolutions that are not covered by these
buttons can be selected from the OSD Menu.
7. MENU
Press the button to bring up the OSD main menu page.
8. EXIT
Press the button to exit from a sub menu or main menu.
9. UP/DOWN/LEFT/RIGHT
Press the Up/Down button to move the highlight bar to your desired
parameter during the OSD operation. Press the Left/Right button to
increase/decrease the value of a selected parameter.