Owner manual

6.2.1 The MAIN MENU

Table 3 defines the MAIN MENU features and functions.

Table 3: The MAIN MENU Features

Mode Function

CONTRAST Set the contrast (0 to 100)

BRIGHTNESS Set the brightness (0 to 100)

FINETUNE Set the hue, saturation and sharpness (0 to 100)

COLOR Set the red, green and blue shades (0 to 100)

SIZE Select the size of the display: full, overscan, underscan, letter box, panscan

OUTPUT Select the output resolution from the menu:

Appears as: Output resolution: Appears as: Output resolution:

1080I60 1080i @60Hz NATIVE

1080P60 1080p @60Hz VGA 640x480

576I 576i SVGA 800x600

576P 576p XGA 1024x768

720P50 720p @50Hz SXGA 1280x1024

1080I50 1080i @50Hz UXGA 1600x1200

1080P50 1080p @50Hz 480I 480i

WXGA 1366x768 480P 480p

WSXGA 1680x1050 720P60 720p @50Hz

WUXGA 1920x1200

OSD Set the OSD parameters: H POSITION, V POSITION, TIMER, BACKGROUND (see

section 6.2.2)

FACTORY RESET Resets to the default parameters (resolution is set to VGA

)

INFORMATION Displays the source, the input resolution, the output resolution and the software version

EXIT Select to exit the menu

6.2.2 The OSD Menu

Table 4 defines the OSD menu.

Table 4: The SETUP Menu Features

Parameter Function

H POSITION Sets the horizontal position of the OSD (from 0 to 100)

V POSITION Sets the vertical position of the OSD (from 0 to 100)

TIMER Sets the timeout period in seconds (from 5 to 100). The default timeout is 10 seconds

BACKGROUND

Sets the OSD background between 0 (solid black) and 8 (transparent)

1 Select “NATIVE” to select the output resolution from the EDID of the connected HDMI monitor

2 If you cannot see the display after factory reset, use the front panel Res. button to set the correct resolution